Free radical oxidation reaction for selectively solvatochromic sensors with dynamic sensing ability

A novel BODIPY (boradiazaindacene) dye denoted as BODIPY-DT containing terpyridine unit has been designed and characterized. The dye is found to be selective and visual solvatochromic sensor toward DMF among test organic solvents. The sensing process displays time-controllable, dynamic signal outputs in the emission colors including red, purple, yellow and even white emission colors. It is presented that selective free radical oxidation reaction happens during the recognition process.     

Ti0.33WO3电子结构和太阳辐射屏蔽性能第一性原理研究

节能减排已成为当今社会发展的主题,对节约能源、提高太阳能的高效综合利用的新型窗用透明隔热材料的理论设计和研究尤其重要.本文采用基于密度泛函理论的计算方法,研究了六方相三氧化钨Ti掺杂前、后的晶格参数、电子能带结构、形成能和光学性质.研究结果表明,Ti掺杂后晶格体积增大,系统能量降为负值,体系具有更好的稳定性;掺杂后电子能带结构发生很大的变化,但材料仍保持n型电导率;随之,其光学性质也发生改变,掺杂前h-WO3无近红外吸收性能,掺杂后的Ti0.33WO3具有很强的近红外吸收性能.在此基础上研究了Ti掺杂h-WO3前、后的太阳辐射屏蔽性能,掺杂前无太阳辐射屏蔽性能;掺杂后的Ti0.33WO3薄膜具有可见光高透明、近红外屏蔽的性能.计算结果为Ti掺杂h-WO3在窗用透明隔热材料方面的研究提供了理论依据.     

B-, N-doped and BN codoped C60 heterofullerenes for environmental monitoring of NO and NO2: a DFT study

ABSTRACT

Using density functional theory calculations, we investigate the gas sensing performance of B-, N-doped and BN-codoped C₆₀ fullerenes towards NO and NO₂ molecules. The calculated adsorption energies and net charge-transfer values indicate that NO and NO₂ molecules have a stronger interaction with the BN-codoped fullerenes compared to the B- or N-doped ones. It is also found that the electronic properties of the BN-codoped C₆₀ exhibit a larger sensitivity towards NO and NO₂ molecules. An increase in the concentration of doped/co-doped B and N atoms tends to weaken the gas sensing ability of these systems.     

Tandem Use of Optical Sensing and Machine Learning for the Determination of Absolute Configuration,Enantiomeric and Diastereomeric Ratios,and Concentration of Chiral Samples

We have developed an optical method for accurate concentration, er, and dr analysis of amino alcohols based on a simple mix‐and‐measure workflow that is fully adaptable to multiwell plate technology and microscale analysis. The conversion of the four aminoindanol stereoisomers with salicylaldehyde to the corresponding Schiff base allows analysis of the dr based on a change in the UV maximum at 420 nm that is very different for the homo‐ and heterochiral diastereomers and of the concentration of the sample using a hypsochromic shift of another absorption band around 340 nm that is independent of the analyte stereochemistry. Subsequent in situ formation of Cu^II assemblies in the absence and presence of base enables quantification of the er values for each diastereomeric pair by CD analysis. Applying a linear programming method and a parameter sweep algorithm, we determined the concentration and relative amounts of each of the four stereoisomers in 20 samples of vastly different stereoisomeric compositions with an averaged absolute percent error of 1.7 %.     

Design,preparation, and characterization of Fe3O4 nanoparticles encapsulating β-cyclodextrin-bearing guanidine as a highly efficient and reusable heterogeneous base catalyst for synthesis of 3,4-dihydropyrano[3,2-c]chromenes

Chromene substructure is an important structural motif present in a variety of medicines, natural products, and materials showing biological activities. Here, a simple and convenient procedure for the synthesis of 3,4-dihydropyrano[3,2-c]chromene derivatives is described. For this purpose, Fe₃O₄ nanoparticles supported on β-cyclodextrin-guanidine were successfully prepared and used as catalyst. The structure of this catalyst was assigned by Fourier transform infrared spectroscopy, X-ray diffraction, scanning electron microscopy, thermal gravimetric analysis, and vibrating sample magnetometer techniques. The prepared nanocomposites were used as a highly active, heterogeneous, and reusable nanocatalyst for the one-pot, three-component reaction of 4-hydroxycoumarin, aromatic aldehydes, and ethyl cyanoacetate. This method has advantages such as mild conditions, high yields, easy workup and simple purification of products, little catalyst loading, cost efficiency, and reusability of the catalyst.     

A self-penetrating and chemically stable zinc (ii)-organic framework as multi-responsive chemo-sensor to detect pesticide and antibiotics in water

Guided by the self-penetrating features can improve the stability of metal organic frameworks (MOFs), an unprecedented 3D self-penetrated framework, {[Zn (tptc)_0.5(bimb)]·H₂O}_n ( NUC-6 , here NUC corresponding to North University of China), with 3D (4,4)-c {8⁶} net, was designed. Benefit from the high chemical stability and excellent luminescent property, NUC-6 can be act as an efficient multi-response chemo-sensor in detecting dichloronitroaniline pesticide and nitrofuran antibiotics in water with the detection limits are 116 ppb for DCN pesticide, 16 ppb for NFT antibiotic, and 12 ppb for NTZ antibiotic. Besides, the mechanisms of luminescence quenching were revealed from the viewpoint of internal filter effect (IFE) and photo-induced electron transfer (PET), implied by the optical spectroscopy and quantum chemical calculation. This work provides a promising strategy to design stable MOFs by improving the self-penetrating features and to expand their practical applications in the detection of organic pollutants in aqueous medium.     

Quantification of fenoprofen in human plasma using UHPLC–tandem mass spectrometry for pharmacokinetic study in healthy subjects

A rapid, simple and sensitive ultra-performance liquid chromatography–tandem mass spectrometry (UHPLC–MS/MS) method has been developed to quantify fenoprofen, a nonsteroidal anti-inflammatory drug in human plasma for a pharmacokinetic study in healthy subjects. Owing to high levels of protein binding, protein precipitation followed by solid-phase extraction was employed for the extraction of fenoprofen and fenoprofen-d3 (used as internal standard) from 200 μL human plasma. Separation was performed on a BEH C₁₈ (50 × 2.1 mm, 1.7 μm) column using methanol−0.2% acetic acid in water (75:25, v/v) under isocratic elution. Electrospray ionization was operated in the negative mode for sample ionization. Ion transitions used for quantification in the selected reaction monitoring mode were m/z 241/197 and m/z 244/200 for fenoprofen and fenoprofen-d3, respectively. Under the optimized conditions, fenoprofen showed excellent linearity in the concentration range 0.02–20 μg/mL (r² ≥ 0.9996), adequate sensitivity, favorable accuracy (96.4–103.7%) and precision (percentage coefficient of variation ≤4.3) with negligible matrix effect. The validated method was successfully applied to a pharmacokinetic study of fenoprofen in healthy subjects. The significant features of the method include higher sensitivity, small plasma volume for processing and a short analysis time.     

Quantitative determination of potential genotoxic impurity 3-aminopyridine in linagliptin active pharmaceutical ingredient using HILIC–UV

This study aimed to develop an analytical method to determine the quantity of the impurity 3-aminopyridine (3AP). 3-Aminopyridine is a reactive reagent in the synthesis of linagliptin. The method was sensitive at level of 30.0 ppm of 3AP relative to linagliptin. The analysis was carried out using hydrophilic interaction liquid chromatography. The analytical column was Tracer Extrasil Silica (150 × 4.0 mm, 3 μm). A mobile phase of water–acetonitrile (10:90, v/v) containing 10.0 mM ammonium acetate was prepared and adjusted to pH 6.0. A UV detector was used to detect the amount of 3AP at a wavelength of 298 nm. Validation of the method was performed as per the International Council for Harmonization of Technical Requirements for Pharmaceuticals for Human Use in terms of detection limit, quantitation limit, linearity, accuracy, precision, specificity and robustness. The calibration curve was linear (r² = 0.999) for 3AP concentration in the range of 30.0–450.0 ppm. This method showed a good sensitivity with a detection limit and a quantitation limit of 7.5 and 25.0 ppm, respectively.     

Micro/Nanoengineered α-Fe2O3 Nanoaggregate Conformably Enclosed by Ultrathin N-Doped Carbon Shell for Ultrastable Lithium Storage and Insight into Phase Evolution Mechanism

The Fe-based transition metal oxides are promising anode candidates for lithium storage considering their high specific capacity, low cost, and environmental compatibility. However, the poor electron/ion conductivity and significant volume stress limit their cycle and rate performances. Furthermore, the phenomena of capacity rise and sudden decay for α-Fe₂O₃ have appeared in most reports. Here, a uniform micro/nano α-Fe₂O₃ nanoaggregate conformably enclosed in an ultrathin N-doped carbon network (denoted as M/N-α-Fe₂O₃@NC) is designed. The M/N porous balls combine the merits of secondary nanoparticles to shorten the Li⁺ transportation pathways as well as alleviating volume expansion, and primary microballs to stabilize the electrode/electrolyte interface. Furthermore, the ultrathin carbon shell favors fast electron transfer and protects the electrode from electrolyte corrosion. Therefore, the M/N-α-Fe₂O₃@NC electrode delivers an excellent reversible capacity of 901 mA h g⁻¹ with capacity retention up to 94.0 % after 200 cycles at 0.2 A g⁻¹. Notably, the capacity rise does not happen during cycling. Moreover, the lithium storage mechanism is elucidated by ex situ XRD and HRTEM experiments. It is verified that the reversible phase transformation of α↔γ occurs during the first cycle, whereas only the α-Fe₂O₃ phase is reversibly transformed during subsequent cycles. This study offers a simple and scalable strategy for the practical application of high-performance Fe₂O₃ electrodes.     

Eu^3+激活氟氧硼酸锗酸盐闪烁玻璃的发光性能

采用传统高温熔融法合成了玻璃组成为B2O3-GeO2-15GdF3-(40-x)Gd2O3-xEu2O3(0≤x≤10)的Eu^3+激活氟氧硼酸锗酸盐闪烁玻璃。在硼锗酸盐玻璃基质中,Gd2O3和GdF3稀土试剂的总含量高达55%,从而确保其密度高于6.4 g/cm^3。闪烁玻璃的光学性能通过光学透过光谱、光致发光光谱、X射线激发发射(XEL)光谱和荧光衰减曲线来表征。玻璃中Gd^3+→Eu^3+离子的能量传递通过激发光谱、发射光谱和Gd^3+-Eu^3+离子间距得到证明,同时也确定了在紫外线和X射线激发下Eu^3+激活氟氧硼酸锗酸盐闪烁玻璃的最佳浓度。Judd-Ofelt理论分析了玻璃中Eu―O键的共价性随Eu^3+掺杂浓度增加而显著增强。Eu^3+激活氟氧硼酸锗酸盐闪烁玻璃在80~470 K温度范围内荧光衰减曲线和发射光谱的温度依赖关系最终证实了其具有较好的发光稳定性。